Multipick Ares-Disc detainer and domplein lock opener

The ultimate opening tool set for disc detainer and dimple cylinders - S1

With this set, all doors are literally opened for you. Unlocking options for two widely used lock systems in one set. Open disc detainer and dimple locks with just a single tool. Just change the scales and the opening attachment and you're ready to go. Simple and practical, saves time and money.

The scales included in the scope of delivery are used for the most common types of dimple and disc detainer cylinders. They serve as a guide for positioning the setting tool above the pin and/or in the level of the disc to be set. Alternatively, you can palpate the pins freely and then set them with the pick.

With the Multipick ARES Opening System, you have all the options to build the right tool for opening disc detainer and dimple cylinders. This set will allow you to open even difficult models. In addition, you have the option to open more types of locks. The basic module offers you the possibility to expand your system modularly.

We are working specifically on new add-ons, such as new attachments for the safe opening and new variations for dimple pin cylinders. You can find all components of Dimple lock opener and Disc detainer lock opener and accessories here.

Our ARES is made of high-quality aluminium with an anodised coating and a special steel alloy, which is used in all our products.

In order to achieve a smooth operation between the tensioning tool and the setting tool, a sliding sleeve has been integrated. Clear laser markings on the corresponding components ensure precise orientation during use. More control can be achieved by individually screwing the included handles into the basic module. These are required in some cases, especially when using the dimple version. Changing the individual parts, such as the dimple pick, scale, positioning ring, key profile, tensioner and disc setter, can be carried out with minimal effort.

In each set there is a tool chart in card form for opening dimple and disc detainer locks.

Scope of delivery:

• 1x Basic module
• 1x Disc setter-T2 (MOS-SST2)
• 1x Tension disc setter-T2 (MOS-SPT2)
• 1x Disc setter-T10 (MOS-SST10)
• 1x Tension disc setter-T10 (MOS-SPT10)
• 1x Positioning ring handle (MOS-PR001)
• 1x Disc driver D-03 (MOZ-D03)
• 1x SDB-Pick 006-3,1 (MOB-P003)
• 1x SDB-Pick 006-3,5 (MOB-P004)
• 1x SDB-Pick 008-3,3 (MOB-P005)
• 1x D6X key profile (MO-D6X)
• 1x Key profile EC550 (MO-EC550)
• 1x Scale-Abus SO2-2,0 (MOS-SK002)
• 1x Scale 3.1 (MOB-SK001)
• 2x Turning handle-V2 (MOZ-GriffV2)
• 1x Positioning ring grid scale (MOB-PRS001)
• 1x Positioning ring handle (MOS-PR001)
• 1x Hex key 1.5 mm (21011)
• 1x Hex key 2.0 mm (01154)
• 1x Spring-loaded thrust piece M3
• 1x Hinge box
• 1x Plastic case